The Fast8 V1 is a merciless adaptation of classic quadframe design on an 8 inch, lowdrag-concept. It's a lightweight and surprisingly stiff approach, especially if you glue the upper and lower arms together with 2K-glue.
8mm wide arms
Sweet spot for longrange/freestyle w great climbing rates:
Airbot Typhoon V2 32bit 4in1 ESC w Brotherhobby 2507/1200KV or 2510/1400KV motors
Several setups possible:
4in1 ESC vs single ESCs
This frame is lightning fast with Avenger2812 motors, but on the heavier side and not optimal for confined mountain spaces.
20 x 20 fc recommended (e.g. Airbot F4 nano)
Great frame for creative people who are not afraid to try new setups.
Printable TPU-components available on community platforms / Social Media as well in this web shop - check downloadable content regularly!
For the gluing purpose, simply clean the surface of the carbon fiber after light sanding with Alcohol or better Acetone. Apply a thin coat of glue preferably on both sides, and screw arms in position. Wipe off excess and let dry on an even surface.